Press the RESET button on the back of the camera to restore factory default settings.Connect the camera and the NVR to the same switch (or connect the camera to the NVR with a network cable), and connect the devices to power.NOTE: The following methods are also applicable if you pair a camera, not in the kit with the NVR. Choose one of the following methods as needed. If you change Wi-Fi settings on the NVR when cameras are offline, you need to pair devices again. For offline cameras, the changed settings cannot be synchronized, and you need to pair the camera with the NVR again. NOTE: After SSID or password is changed on the NVR, the new SSID or password will be synchronized to online cameras. The NVR assigns an IP address to connected devices based on the start and ends IP address range.ĬAUTION: The NVR’s wireless NIC IP must be in a different network segment from its LAN IP address. Wireless NIC IP: The IP address of wireless NIC.You are recommended to choose a channel with less signal interference. The region, Channel: Signal interference varies with region and channel.You are strongly recommended to change into a strong password. Password: The default is the last eight digits of the serial number.SSID: MAC address by default, you can change it as needed.
Right-click on the NVR and then choose Menu > Network > Wi-Fi AP.Follow the steps to change Wi-Fi settings. The camera will get online and start live view on the NVR once the NVR and camera are connected to power.
0 kommentar(er)
